## kag##################################################################
#
# NBP calibration data file for sensors
#
# NOTE:
# 1. In order for these calibrations to take affect, uwint must
# be restarted.
#
# 2. Please enter serial numbers for all sensors
#
# 3. Remember, when you check this file back into RCS, use the 
#    -u option.  It MUST remain in /usr/local/packages/rvdas/config
#
# Revised August 10, 2000  K. Gavahan
# - Initial revision.
#
# Revised...
#
###################################################################
#
# Ship - LMG or NBP
#
SHIP NBP
#
###################################################################
#
# Science specific information
#
VESSEL: NBP
TITLE: GLOBEC IV
NUMBER: NBP0204
START_DATE: 07/31/02
END_DATE: 09/19/02
CHIEF_SCIENTIST: Wiebe
PARTICIPATING SCIENTISTS: 
#
#------------------------------------------------------------------------
# Data specific information
#
# Base file name for data files
BASE_FILE: NBP0204
#
# NAVIGATION LOGGERS - loggers and data directory
NAV_LOGGERS: l_3df,l_furuno,l_gyr,l_ngl,l_pcode
DATA_LOC_NAV: /data/not-public/logger/nav
#
# UNDERWAY LOGGERS - loggers and data directory
UW_LOGGERS: l_met,l_sim,l_tsg,l_grv,l_bathy
DATA_LOC_UWAY: /data/not-public/logger/uw
#
NETWORK: science
#
#
LOGGER_LOC: /usr/local/packages/rvdas/bin
#
#
###################################################################
#
# Geohypsical information
# 
# The value for YEAR can be obtained by running /usr/local/bin/decimal_year.
# It should be updated everytime the gravity offset is updated.
#
# Gravity offset information
#
CRUISE_ID: NBP0204
#GRAV_OFFSET     UPDATED 03-10-02
GRAV_OFFSET: 972345.03
DEPTH: BATHY
YEAR: 2002.57
#
###################################################################
#
# Gravity QC
#
# LOCATION   : where the final data file is located
# GAP        : minimum allowable time gap     (in seconds)
# FIELD      : field where value can be found (starting at 1 after timestamp)
# NAME       : name of the field
# MIN        : minimum allowable value          (XXX means ignore)
# MAX        : maximum allowable value          (XXX means ignore)
# ROC        : maximum allowable rate of change (XXX means ignore)
# DELIMITER  : the delimiter for the body of data items (SPACE, COMMA, . . .)
#
#TAG  LOCATION  GAP FIELD NAME MIN MAX  ROC DELIMITER
GRQC /data/current_cruise/geopdata/GRV/ 30 1 GRAVITY 6000 12000 100 SPACE
###################################################################
#
# NBP PSP and PIR coefficients
#  PSP serial number: 33090F3	Cal: 12-06-01
#  PIR serial number: 32845F3	Cal: 07-19-02
#
#   PSP and PIR 
#     PIR = mV / ( coeff V/wm^-2 * 10^3mV/V)
#     PIR coefficient = 1/ (3.88x10^-6 * 10^3)
#     PIR coefficient  = 1/(3.88x10^-3)                   
#     PIR coefficient  = 257.7
#
#     PIR = mV / ( coeff V/wm^-2 * 10^3mV/V)
#     PIR coefficient = 1/ (4.13x10^-6 * 10^3)
#     PIR coefficient  = 1/(4.13x10^-3)
#     PIR coefficient  = 247.1
#
#     PSP = mV / ( coeff v/wm^-2 * 10^3mV/V) 
#     PSP coefficient = 1/(8.19x10^-6 * 10^3) 
#     PSP coefficient = 1/(8.19x10^-3) 
#     PSP coefficient = 122.1
#NOTE: Pay attention to significant digits
PSP1 122.1
PIR1 247.1
#
###################################################################
#
# NBP met
#
# PAR serial number: 6356 2/15/O1
# PAR Calibration Factor = 6.08 V/uE/cm^2sec
# PAR Probe Dark offset = 0.3 mV
#
# PAR      1/6.08 (Dry V/uE/cm^2sec) 0.0003 (Probe Dark in Volts)
PAR 0.1645 0.0003
#
###################################################################
#
#  Transmissiometer
#  Serial number CST-422PR
#  Date Calibrated 12/20/01
#
#  % transmission = (vsig - vd) / (vref - vd)
#
#    vd = 0.059
#    vref - 4.818
#  
#   = (vsig - 0.059) / (4.818 - 0.059)
#
#     Vdark   Vref
TRAN  0.058   4.733 
#
####################################################################
#
# Engineering
#
# RPM pitch rudder 
SENG  25.  10.  3400.  2500.  20. 
PENG  25.  10.  3400.  2500.  20. 
# Roll and Pitch  Pot
POPI  4.0  4.0
# Seawater flow meter
#  to convert from A to D and from gallons/min to liters/min
SWFL  5.72
#
###################################################################
#
# NBP winches
#
# Scale conversion information for the science
# winches on the NBP.  Sheave measurements made
# on 01/01/00.  Wire Pull tests done on dates
# indicated 
#
# stbd winch    sheave diam= 28.125"  .714m
# 9/16" wire    wire diam  = 0.5625"  .014m
#       total circumference= 90.124" 2.289m 
#               magnets    = 24
#       Payout Scale factor= 3.755    .095
#      Tension Scale Factor= 200
#           operation limit= 20,718 lb
#       
# port winch    sheave diam= 28.125   .714m
# .680" wire    wire diam  = 0.680    .017m
#       total circumference= 90.493" 2.297m 
#               magnets    = 24
#       Payout Scale factor= 3.77    0.096m
#      Tension Scale Factor= 180 
#           operation limit= 20,150 lb
#
# baltic winch  sheave diam= 12.125   .308m
# .322" wire    wire diam  = 0.322    .008m
#       total circumference= 39.103" 0.993m 
#               magnets    = 10
#       Payout Scale factor= 3.910   0.099m
#      Tension Scale Factor= 200
#           operation limit= 5,980 lb
#
# Load pin in waterfall winiches is sending out an A/D
# value of 2 even under 0 tension
# Also, payout pos/neg is opposite other winhes
# uwf winch     sheave diam= 12.125   .308m
#               wire diam  = 0.322    .00818m
#       total circumference= 39.103" 0.993m 
#               magnets    = 10
#       Payout Scale factor= 3.910   0.0993m
#      Tension Scale Factor= 60 
#           operation limit= 5,980 lb
#
# lwf winch     sheave diam= 12.125  0.308m
#               wire diam  =  0.3125 0.00794m
#       total circumference= 39.074" 0.993m 
#               magnets    = 10
#       Payout Scale factor=  3.907  0.0993m
#      Tension Scale Factor= 60 
#           operation limit= 6,565 lb
#
# wnc1 and WNC2 are old.
#
#winch   payout tension speed
#name fields are in format A:B where y=Ax+B
#
# new winch strings
# meters out = mout * a
# speed = speed * c
# tension = (tension * b) - e
#      a     b      c    d     e
SWNC  -0.1   200   1.67  20718  -800
PWNC  0.1   180   1.67  20150  0
BWNC  0.1   62.5  1.67  5980   437.5
WWNC  -0.1  60   -1.67  5980   0
# old winch strings
LWF  -0.1  60  -1.67  6565   0
UWF  -0.1  60  -1.67  5980   0
WNC1   0.1  200 1.67 NAN 0
WNC2  -0.1 60 -1.67 NAN 0
#
#
###################################################################
###################################################################
##
#************* Calibration factors for SBE 21 S/N 1390 ********************
#*************    Calibration Date of 26 Feb 02   *******************
# currently in use
# Temperture calibration factors
%TEMPERTURE%
g 0.00421133811
h 0.000597506417
i 0.00000674711109
j -0.00000126911965
fo 1000.000
*

# conductivity calibration factors SBE 3 S/N 4015
%CONDUCTIVITY%
g -3.93721982
h 0.471760725
i 0.000391210505
j 0.00000224390213
p -0.0000000957
t 0.00000325
*

#************* Remote Temperature Probe SN #4071 *******************
#************* Calibration Date of Apr. 16 2002 *******************
# external temperature calibration factors
%EXTERNAL TEMPERATURE%
g 0.00435876516
h 0.00063986307
i 0.0000213393613
j 0.00000157577668
fo 1000.000
*
#
#####################################################################
#