pxlmono http://www.cs.wisc.edu/~ghost/doc/printer.htm gs -q -dBATCH -dPARANOIDSAFER -dNOPAUSE%B%A%Z -sOutputFile=- - | perl -p -e "s/\xc0.\xf8\x26/\xc0%E\xf8\x26/g" *DefaultResolution: 1200dpi Drivers for PCL 6 printers, both B&W and colour, much faster than the "lj5gray"/"lj5mono" drivers.<p> The "pxlmono" and the "pxlcolor" driver are the same code, the difference is only that the "pxlcolor" gives colour and the "pxlmono" grayscale output.<p> The resolution must be given both with the "-r" option on the command line of GhostScript and as PJL command.<p> printer/Generic-PCL_6_PCL_XL_Printer printer/Brother-HL-1250 printer/Brother-HL-1270N printer/Brother-HL-1450 printer/Brother-HL-1470N printer/Brother-HL-1650 printer/Brother-HL-1660e printer/Brother-HL-1670N printer/Brother-HL-1850 printer/Brother-HL-1870N printer/Brother-HL-2060 printer/Brother-HL-2460 printer/Brother-HL-2460N printer/Brother-HL-2400CeN printer/Brother-HL-2600CN printer/Brother-HL-3400CN printer/Brother-HL-3450CN printer/Brother-HL-4000CN printer/Brother-HL-5030 printer/Brother-HL-5040 printer/Brother-HL-5050 printer/Brother-HL-5070N printer/Brother-HL-7050 printer/Brother-HL-7050N printer/Canon-LBP-1000 printer/Canon-LBP-1760 printer/Epson-EPL-5800 This driver works at all resolutions. printer/Epson-EPL-5800PS printer/Epson-EPL-5900 printer/Epson-EPL-5900PS printer/Epson-EPL-6100 printer/Epson-EPL-6100PS printer/Epson-EPL-N2050 printer/Epson-EPL-N2050PS printer/Epson-EPL-N2050plus printer/Epson-EPL-N2050PSplus printer/Epson-EPL-N2120 printer/Epson-EPL-N2750 printer/Epson-EPL-N2750PS printer/Fujitsu-PrintPartner_20W printer/HP-Color_LaserJet_4500 printer/HP-Color_LaserJet_5000 Not tested, probably works. printer/HP-LaserJet_5 printer/HP-LaserJet_2100 printer/HP-LaserJet_2100M printer/HP-LaserJet_3200 printer/HP-LaserJet_3200se printer/HP-LaserJet_4000 Might work for 1200dpi mono? printer/HP-LaserJet_4050 to 1200dpi printer/HP-LaserJet_1200 printer/HP-LaserJet_1220 printer/HP-LaserJet_1300 printer/HP-LaserJet_2200 printer/HP-LaserJet_2300 printer/HP-LaserJet_3200m printer/HP-LaserJet_3300_MFP printer/HP-LaserJet_3310_MFP printer/HP-LaserJet_3320_MFP printer/HP-LaserJet_3320N_MFP printer/HP-LaserJet_3330_MFP printer/HP-LaserJet_4100 printer/HP-Color_LaserJet_2500 printer/HP-Color_LaserJet_4550 printer/HP-Color_LaserJet_4600 printer/HP-Color_LaserJet_5500 printer/HP-LaserJet_4200 printer/HP-LaserJet_4300 printer/HP-LaserJet_5 printer/HP-LaserJet_5100 printer/HP-LaserJet_8150 printer/HP-LaserJet_9000 printer/HP-Business_Inkjet_3000 printer/IBM-Infoprint_12 Prints 1200x1200 using pxlmono driver, but I could only make it work after setting to 1200dpi using PJL. You can do this conveniently using Matt Simpson's pup utility. If you do use pup, the resolution option for HP2100M worked fine (i.e. no need to compile IEEE1284 into your kernel). printer/Infotec-4651_MF printer/Kyocera-FS-1000 printer/Kyocera-FS-1000plus printer/Kyocera-FS-1200 printer/Kyocera-FS-1700plus printer/Kyocera-FS-3700plus printer/Kyocera-FS-6700 printer/Kyocera-FS-7000plus printer/Kyocera-FS-9000 printer/Kyocera-FS-1750 printer/Kyocera-FS-3750 printer/Kyocera-FS-3800 printer/Kyocera-FS-1010 printer/Kyocera-FS-1050 printer/Kyocera-FS-1800 printer/Kyocera-FS-1800plus printer/Kyocera-FS-1900 printer/Kyocera-FS-9100DN printer/Kyocera-FS-9500DN printer/Kyocera-KM-1530 printer/Kyocera-KM-1810 printer/Kyocera-KM-2030 printer/Kyocera-KM-2530 printer/Kyocera-KM-3530 printer/Kyocera-KM-4230 printer/Kyocera-KM-4530 printer/Kyocera-KM-5230 printer/Kyocera-KM-5530 printer/Kyocera-KM-6230 printer/Minolta-PagePro_1100 I've been able to print various things using this driver, but when attempting to print PostScript created by Gnumeric, I get the following from the printer on some pages:<p> <tt>PCL XL error<br> Subsystem: STATE<br> Error: IllegalAttributeDataType<br> Operator: SetLineDash<br> Position: ...<p></tt> I wonder whether the fault lies in Gnumeric's PostScript generator (which Ghostscript renders without complaining) or in the printer's PCL XL interpreter. Using "ljet4" driver helped to solve this, but I suspect it worked just because PCL 5 is a bit dumber than PCL 6, so GhostScript could not pass it so high-level data and have filtered out the bad PostScript...<p> printer/Ricoh-Aficio_220 printer/Samsung-ML-1250 printer/Samsung-ML-1450 printer/Samsung-ML-1450PS printer/Samsung-ML-1750 printer/Samsung-ML-2150 printer/Samsung-ML-2150PS printer/Samsung-ML-2151N printer/Samsung-ML-2151NPS printer/Samsung-ML-2152W printer/Samsung-ML-2152WPS printer/Samsung-ML-2550 printer/Samsung-ML-2551N printer/Samsung-ML-2552W printer/Samsung-ML-7300 printer/Samsung-ML-7300N printer/Samsung-ML-4600 Use this one to use the PCL6 language and to permit the printer to use 1200 dpi mode. printer/Samsung-ML-7000_7000P_7000N printer/Samsung-ML-7050 printer/Samsung-ML-1650 printer/Samsung-ML-1651N printer/Sharp-AR-161 printer/Okidata-Okipage_10ex printer/Okidata-Okipage_14ex